How to Prepare Plastic for Painting

Co-authored by Patrick Coye

Last Updated: June 24, 2021 References

Painting plastic is a great way to spruce up an old outdoor chair, car parts, dishware, birdfeeders, or a decorative art piece. Plastic isn’t as receptive to paint as other surfaces like brick, stone, or wood so washing, sanding, and priming the plastic is key to a professional-looking paint job.^{[1]
X
Expert Source

Patrick Coye
Painting Specialist

Expert Interview. 22 July 2020.} Before you get started, make sure to use a primer and paint that work well for the type of plastic you’re painting.

Method 1

Method 1 of 2:

Washing the Plastic

Download Article

1
Scrub the plastic piece with soapy water and a sponge. Fill your sink or a bowl with water and dish soap and stir it around until suds form. Soak a non-scratch sponge in the water and rub down the surface of the plastic.^{[2]
X
Research source}
- Cellulose sponges are best, but you can also use a microfiber cloth, sea sponge, or sponge made of a blend of cellulose, nylon, or polypropylene fiber.
- If you're painting a piece that has set-in stains that you're worried may not be covered by the paint, pour rubbing alcohol onto the stain and let it sit for 10 to 20 minutes before scrubbing it away.
2
Rinse the piece and let it dry completely for 1 hour. Once all the residue has been washed away, rinse the plastic piece with regular water until there are no suds left. Wipe it with a rag and let it dry for 1 hour or until it’s completely dry.^{[3]
X
Research source}
- To speed up the process, lay the piece in a well-ventilated area with a fan.
Advertisement
3
Use a fine-grit sanding block to rub the entire surface. The idea is to roughen up the surface a little so the paint has some texture and more surface area to cling to.^{[4]
X
Expert Source

Patrick Coye
Painting Specialist

Expert Interview. 22 July 2020.} Fine-grit sandpaper will scratch up the surface without weakening or damaging the plastic. Use a light to medium pressure to sand down the entire surface you plan to paint.^{[5]
X
Research source}
- If the plastic has shiny parts, make sure to sand down those parts a little extra because the paint will have a harder time sticking to a slick, glossy surface.
- If the plastic piece has a curved surface or small crevices, it may be easier to use sandpaper instead of a sanding block.
- You can buy a 360, 400, or 600-grit sanding block or sandpaper at any home repair or crafting store.
4
Wash off bits of dust and sand with water and let it dry. Any loose bits of sanding or dust will mess up your paint job, so hold the piece under the sink or hose to get rid of it. Use a towel to wipe up excess moisture and then let it sit for an hour or until the piece is completely dry.^{[6]
X
Research source}
- Place the plastic piece near a fan or in a well-ventilated area to speed up the drying process.

Method 2

Method 2 of 2:

Applying Primer

Download Article

1
Lay a tarp or newspaper over any surface to protect your work area. If you have a tarp, spread it over the floor or a countertop so you have a place to prime and paint without damaging the underlying surface. If you're painting something smaller, lay down some newspaper sheets so you won’t accidentally get primer on the floor, carpet, or countertop.^{[7]
X
Research source}
- Make sure your work area is well-ventilated because inhaling fumes from primer can cause unpleasant side effects like headaches, dizziness, or nausea.
2
Select a primer made especially for plastic. Most plastic primers contain alcohol and glue, ensuring the paint will go on evenly and stick without chipping or smudging. You can buy primer made for plastic from any home improvement store or from most craft stores.^{[8]
X
Research source}
- Shellac-based primers are quick-drying but aren't ideal for plastic that is exposed to high heat (like outdoor chairs or car parts).
- You can use oil-based or latex primers on plastic. Just note that these work best if you plan to paint the piece with either oil-based or acrylic paint.
- If the plastic piece is flexible or bends in any way, avoid using an oil-based primer and oil-based paints because they don't allow for movement.
3
Spray a thin layer of primer onto the plastic.^{[9]
X
Expert Source

Patrick Coye
Painting Specialist

Expert Interview. 22 July 2020.} Shake the can of primer and hold it 6 inches (15 cm) to 8 inches (20 cm) away from the surface. Spray a thin, even layer, working in sections from left to right. Move your hands in even lines to make sure you're not accidentally going over the same area twice.^{[10]
X
Research source}
- Avoid applying a thick layer onto the plastic because it may glob up and cause the surface to have irregular bumps.
- If you're concerned about the final painted product being chipped or scratched, apply 2 very thin layers of primer. Just be sure to let the first layer dry completely before you add the second layer.
4
Place the piece in a well-ventilated area to dry for 1 hour. Letting primer dry is key before putting on the first layer of paint. Otherwise, the paint may blend with the primer, causing discoloration and unevenness that may lead to chipping. The primer will be dry to the touch after 30 minutes, but wait for at least another half-hour before applying your first layer of paint.^{[11]
X
Research source}
- If you live in an area that's very humid, it may take up to 3 hours for the primer to fully dry.
- Read the instructions on the canister of the primer to see exactly how long the manufacturer suggests you wait before applying your first coat of paint.
5
Wipe the primed plastic with a paper towel or microfiber rag. The trick to a professional-looking paint job is making sure nothing comes between the surface of the plastic and the paint. Any dust or bits of debris can cause lumps or chipping, so wipe down the plastic a final time before starting to paint.^{[12]
X
Research source}
- Make sure to place the piece in an area free from lots of airborne dust or pet hair so you don’t have to deal with debris midway through painting.
6
Paint the plastic with spray paint especially made for plastic. Shake the can beforehand to prepare the paint. Hold the canister 6 inches (15 cm) to 8 inches (20 cm) away from the plastic and spray it on it thin, even layers. Let it dry completely for about 30 minutes to 1 hour before adding a second coat.^{[13]
X
Research source}
- If you can’t find a spray paint that specifies it’s made for plastic on the label, multipurpose spray paint will work just as well.
- For a perfect paint job, use a paintbrush to touch up any areas that look uneven or places you may have missed.
- You can use only paint and a brush to cover the entire surface, but it may take longer and may not go on as evenly.
- Make sure you’re painting in a well-ventilated area.

Expert Q&A

Search

Add New Question

Question

How do you prevent overspray?

Patrick Coye
Painting Specialist
Patrick Coye is the owner and operator of Patrick’s Painting & Home Improvement in Alexandria, Virginia. With over 15 years of experience in residential construction, Patrick specializes in painting, wallpaper removal/installation, drywall, staining decks and fences, and kitchen cabinetry painting. To date, Patrick and his team have painted over 2,000 houses and stained over 800 decks. Patrick's Company won a "Top Job" award from the American Painting contractor magazine in 2020.

Patrick Coye

Painting Specialist

Expert Answer

Try putting down a drop cloth underneath whatever surface you are spray painting. This will help you avoid accidentally spraying surrounding surfaces.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 0 Helpful 0
Question

What are some mistakes to avoid when spray painting plastic?

Patrick Coye
Painting Specialist
Patrick Coye is the owner and operator of Patrick’s Painting & Home Improvement in Alexandria, Virginia. With over 15 years of experience in residential construction, Patrick specializes in painting, wallpaper removal/installation, drywall, staining decks and fences, and kitchen cabinetry painting. To date, Patrick and his team have painted over 2,000 houses and stained over 800 decks. Patrick's Company won a "Top Job" award from the American Painting contractor magazine in 2020.

Patrick Coye

Painting Specialist

Expert Answer

I would say don't spray in direct sunlight. Try to do it in a shaded area so the paint doesn't dry as quickly. When paint dries too quickly, you can end up with intercoat delamination, which describes when the paint starts to peel because the gases are produced too quickly and aren't able to properly dry. Also remember to be conscientious of overspray. Take the wind into consideration whenever you're spraying, as it will get onto other surfaces if it is a windy day.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 0 Helpful 1

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

If you don't plan to paint the entire surface or want to create a striped design, apply painter's tape to those parts before you spray on the primer and don't take it off until after you've painted the piece.

Thanks
Helpful 0 Not Helpful 0

Submit a Tip

All tip submissions are carefully reviewed before being published

Submit

Thanks for submitting a tip for review!

Warnings

Inhaling fumes from primer and paint can cause confusion, headaches, fatigue, dizziness, and nausea. If you experience any of these symptoms, move to a well-ventilated area right away.^{[14]
X
Trustworthy Source

U.S. National Capital Poison Center
Independent poison control center providing resources to prevent poisonings and save lives

Go to source}

Thanks
Helpful 0 Not Helpful 0